top of page
Commercial Building Exterior

Drone Facade
Inspection Software


Safely Mark
Top and Bottom Altitudes

With Hammer you can position the drone at the same level as the base of the building. This will fetch the drone’s current altitude and apply it to the mission as a parameter.

By manually positioning your drone so that it is level with the top of the building or structure, with Hammer Missions you will be able to retrieve the drone's current altitude and apply it to the top altitude parameter in the mission.

Fly-To-Draw Your Mission 

How can you ensure that your planned flight is both safe and precise? One solution is to fly the drone manually around the target asset (roof, tower, wind turbine, etc) for the first time and create the mission plan using the drone as a measurement tool.


Hammer makes this process dead easy. Simply fly your drone around the target of interest and tap on drone icon on the screen to add a 3D point to the mission plan. 

Vertical Inspections.png

Never Lose Focus

Commercial inspection flights are not always easy. One common issue is to lose camera focus during flight due to varying distances from the target object. 

At Hammer, we’ve introduced auto-focus capabilities within Inspection missions, simply switch it on while configuring your mission.

Upload and Annotate  Images in 3D  

Capturing good quality data is hard but only half the job.
With Hammer Hub, you can upload, process, annotate and share the drone data with all stakeholders,

all in 3D!

3d data analysis demo.gif
Combined Shape_edited_edited.png

Hear It from Our Customers

"Hammer com­bines all oth­er flight plan­ners into one, cov­er­ing all pos­sible mis­sion types. No need to use mul­tiple flight plan­ners any­more; Ham­mer does it all!"

Eagle Drone, NL

Get started with us

geometrics logo.png
bottom of page