Drone Bridge Inspection Software
Capture the deck, girders, and underside with drones, build a measurable 3D model, and let AI find and quantify cracking, spalling, and corrosion — without lane closures or rope access.
Inspect the whole structure
without closing it
Capture the deck, girders, columns, and underside from automated drone flights. Engineers review the structure in 3D instead of under a lane closure or from a rope, so fewer crews are put at height and the survey still covers every element.
A record that meets the mandate
and survives review
Mark defects on 2D and 3D outputs and issue a structured, located record that engineers, asset managers, and agencies can review. Because findings are located and measured, they stand up when questioned.
Locate and measure
every defect
AI detects and quantifies cracking, spalling, and corrosion across the imagery. An engineer reviews the findings, and each defect carries a location, a severity rating, and a measurement on the model — from hairline cracks to section loss.
Frequently Asked Questions
Hammer Missions supports most DJI Enterprise drones for flight planning & AI analysis.
For 3D modeling & AI analysis, you can also use Skydio, Parrot or Autel drones.
You can find a complete list over here: https://www.hammermissions.com/supported-drones
Hear It from Our Customers
"Manually documenting and quantifying the facade deficiencies would've been nearly impossible without Hammer Missions. These tools, combined with engineering principles and careful review, have provided a baseline for saving and repurposing this landmark building"
- Clay Harman, Associate, Senior Engineer at RDH Building Science Inc.
Get Started
