top of page
Writer's pictureHammer Missions

Connecting DJI Matrice 300 with Hammer Missions

Updated: Jul 19, 2022



Overview


DJI's latest edition to the Matrice series - the DJI M300 is poised to be the next industrial drone workhorse, but how do we connect and control the DJI M300 from third party applications such as Hammer Missions?


We break it down below.


Steps


  1. Connect to the drone to the smart enterprise controller shipped with the drone.

  2. Now, connect the smart enterprise controller to an external iPad using the USB port in the top right corner of the controller, and an iPad USB cable.



3. Once the USB port is connected to the external iPad, the built-in display would show a prompt saying 'External Device connected' indicating that the control has been passed on the external device.


Note: Please try to use a regular USB cable for the connection (USB-C cables are reported to have connection issues)

4. Launch Hammer Missions on the iPad and you're good to go!


5. Pro Tip: To securely mount your iPad on top of the smart enterprise controller, we recommend using a tablet mounting kit as shown below.



Summary

And that's pretty much it! This is how you can connect Hammer Missions to your DJI Matrice 300 and take advantage of the diverse range of missions Hammer has to offer. Here's Hammer's Vertical Inspection mission in action with the DJI M300:



If you’d like to learn more about other missions supported in Hammer, please visit our mission tutorials.


To learn more about our enterprise solutions, including mission collaboration, flight analytics and more please contact us at team@hammermissions.com


Komentáře

Komentáře se nepodařilo načíst.
Zdá se, že se objevily se technické potíže. Zkuste se znovu připojit nebo stránku obnovit.

For more articles, subscribe to our monthly newsletter!

Thanks for subscribing!

bottom of page